Key Functions / Description; On/Off; Cal/Print; F" Key - Acculab SVI-50C Instruction Manual

ENGLISH

Key Functions / Description:

1. ON/OFF:

Press to turn scale ON or OFF.

2. ZERO/TARE:

Pushing ZERO/TARE key "zero's" display, pushing and holding ZERO/TARE key for more than 3
seconds accesses application menu.

3. "F" Key:

Function key for applications (Unit toggling, Counting & Totaling ) and menu scrolling.

4. CAL/PRINT:

Press and "hold" CAL/PRINT key (for approximately 3 seconds) and scale will automatically enter
calibration mode (displaying one of three weight values). Press and "release" CAL/PRINT key to print
displayed information when utilizing RS-232 interface.

5. LIGHT :

Turns on backlight during battery operation (Auto Off: One Minute).

Calibration:

Weight Calibration:
1
"CAL/PRINT" key for more than 3 seconds to enter the calibration mode.
Depending upon your Model a default weight will be displayed in "kg" (note: you have 3 weight values
2
to choose from)
In order to select additional cal-weight options, press and release the "F" key and the display will
3
toggle between selectable values based on model. (Please see Product Specifications)
After selection of the desired cal-weight option, press the "CAL/PRINT" key and release to confirm,
4
and the value will flash to begin calibration.
5 Place corresponding weight onto center of pan. If weight is accepted, the display will stop flashing and
show "selected kg" value in display.
2
ON / OFF TARE / ZERO
1.
with the pan cleared and zero stability indicated in display, press and hold the
LIGHT
F CAL / PRINT
2. 3. 4.
5.