Features Menu Settings - Beko LCD panel Owner's Manual

Note: Since the use of certain functions
in order to change the picture sizes for
collective projection or commercial purposes
(modifying the height and width etc.) will
be deemed an infringement of the picture's
copyright, legal proceedings can be carried
out as required under relevant laws.

7.3-Features Menu Settings

Press the M button on your remote control.
Select FEATURES by pressing the Up/
Down navigation buttons from the main
menu and press the OK button. The
Features menu will be displayed.
FEATURES
LANGUAGE
SLEEP TIMER OFF
PANEL LOCK
DECODER
CHANGE
You can select the titles for which you would
like to perform an operation in this menu by
using the Up/Down navigation buttons.
7.3.1-Language
Select the Language tab and press Right/
Left navigation buttons to select the
language of the desired country. All the
setting displays of your television will be
shown in the language that you selected.
7.3.2-Off Time
Off Timer switches your television
automatically to Standby Mode after the
preset time has elapsed. You can adjust this
time from 15 to 120 minutes with increments
of 15 minutes. To activate this feature, select
the Off Time tab and press Right/Left
navigation buttons to select the desired time.
ENGLISH
OFF
OFF
BACK
7.3.3-Panel Lock
If this feature is turned On, the control
buttons on your LCD television will be locked
and will not function. They will be active
again when the feature is turned Off.
7.3.4-Decoder
This feature is used to turn off the sound
and picture output on the scart. If the
scart output is required to be active (on)
for an analog decoder or recorder device
that will be connected via its socket, then
switch to the channel to be recorder and
set the DECODER option to ON from the
FEATURES menu by means of right/left
navigation buttons. This value should be
stored separately for each channel.
15 I
EN