Beko LCD panel Owner's Manual page 6

16”/18,5”/21,6”/22”
Table of Contents

Advertisement

16) Unplug the power cable
during thunderstorms or
when you will not use your
device for a long period of
time.
17) Consult authorised
service personnel for
service requirements.
Never attempt to
repair the device
yourself. Opening the
cabinet can expose you to dangerous
voltages or other hazardous situations.
Service is required in situations such as
damage to the power cable of the device
or its plug, water spills or substances
falling into the device, the device is
subjected to rain or moisture, it does not
operate normally or it is dropped.
18) Wipe the TV cabinet
clean with a soft and dry
cloth. Wipe dust from the
screen gently with a soft
cloth. Stubborn stains
can be cleaned with a
cloth slightly moistened
with soap and lukewarm water. Never
use solvents such as thinner or gasoline
for cleaning. Unplug the AC power cable
from the socket when cleaning the TV.
Otherwise, there is the risk of electric
shock.
19) Do not dispose of the
batteries in fire.
• Do not short circuit,
dismantle or overheat
the batteries. There is
the risk of explosion
if the batteries are not replaced
correctly. Replace only with the same
or equivalent type batteries.
20) Disposing of the exhausted
batteries:
Dispose of the exhausted batteries
in accordance with the local
laws and regulations in order to protect
our environment.
21) Do not dispose of your TV
with regular household waste.
Observe local laws and
regulations for disposal.
Note 1: This is a Class A product.
During operation, the device can cause radio
interference. In this case the user may have
to remedy this. Please contact your specialist
dealer.
Note 2: Electromagnetic fields can cause
temporary performance degradation. This
can be distinguished as noise in the image.
Note 3: Tighten the screws that are used
to connect the wall mount kit by 1 Nm
(10kgfcm) maximum.
Note 4: Your television can operate with
220-240V AC or 12V DC external power
supply. However, do not connect 220-240V
AC and 12V DC external power supplies to
your television at the same time. Otherwise,
your television can get damaged.
Note 5: Do not use any power supply
generating different voltages other then the
12V DC when operating your television with
DC power supply or vehicle battery. Current
for 12V DC external power supply to be used
in 16" TV should be at least 3A, current for
12V DC external power supply to be used in
19" TV should be at least 4A, current for 12V
DC external power supply to be used in 22"
TV should be at least 5A.
Note 6: When you are operating your
television in a vehicle and the vehicle is not
running, avoid keeping it turned on for long
periods since this may cause the vehicle
battery run flat.
5 I
EN

Advertisement

Table of Contents
loading

Table of Contents