Channel Number; Fine Tuning - Beko LCD panel Owner's Manual

To stop the process at any given time,
please press the M button. The Program
Table, which will allow you to sort the
channels as you wish, will be displayed after
the automatic search is complete.
6.2.2-Manual tuning of channels and
storing in the memory
6.2.2.1-If you already know the

channel number

Press the M button. Move to the SETUP
menu by pressing the down navigation
button in Main Menu and confirm your
selection with OK button. The Setup menu is
displayed.
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
CHANGE
Select the system in which you
would like to make the search
from the SYSTEM tab. Move into
CHANNEL tab by pressing the
down navigation button. Press OK
on your remote control to select
"S" for cable channels and "C" for
channels received via the antenna.
Move onto the PROGRAM NO
tab and using the number buttons
enter the channel number in which
you would like to have the channel
stored. If the broadcast viewed on
the screen is of your desired quality, first
move onto the STORE tab with the Down
navigation button to store in the memory
the selection you have made and store
the channel by pressing the Right or Left
navigation buttons. The prompt STORED
will be displayed briefly. The channel will be
stored according to the programme number
of your choice. You can tune and store in
memory other channels the same way. In
the event that you wish to exit the channel
settings menu for any reason, simply press
the EXIT button.
BG
S06
0
◄ ►
P13
BACK
11 I
EN
6.2.2.2-If you do not know the
channel number
Press the M button. Move to the
SETUP menu by pressing the
down navigation button in Main
Menu and confirm your selection
with OK button. The Setup menu
is displayed. Select the system in
which you would like to make the
search from the SYSTEM tab. Move
into CHANNEL tab by pressing the
down navigation button. Press OK
on your remote control to select
"S" for cable channels and "C" for
channels received via the antenna.
Select SEARCH tab using the up/
down navigation buttons, and scan
the channels in ascending order
with Right navigation button and
in descending order with Left navigation
button. If the channel that is found is of your
liking, select the STORE tab. Then store
it in the memory by pressing the Right or
Left navigation buttons. Repeat the same
procedure for other channels by selecting
the program number of your choice from
the PROGRAM NO tab. If the channel
you found is not of the desired quality and
requires Fine Tuning or if you would like to
rename the channel, refer to the relevant
sections.

6.2.3-Fine Tuning

If the channel you found is not of
the desired quality and requires
Fine Tuning, then select the
FINE TUNE tab by pressing the
Down navigation button in the
SETUP menu. Using the Left/
Right navigation buttons on your
remote control, adjust the broadcast
displayed on the screen to your
desired quality. Under normal
circumstances, you will not require to use
the Fine Tune function. The Automatic
Frequency Lock values of your television will
automatically adjust and lock themselves
to the channel. However, you might need
it in case the TV channels do not operate
according to the standards. To store in the
memory, the settings you have made, select
the STORE tab and press the Right or Left
navigation button.