Beko LCD panel Owner's Manual page 21

9.4-Connecting an external device via HDMI connection
Side view of the TV
HDMI: When a connection is made via HDMI socket, select the HDMI input you connected
through from the Source menu and press the OK button to be able to display these pictures.
Your TV will switch to the selected source.
Connect to the HDMI input at the back of your TV by using the connector located on your PC
or your digital video-transmission device with a suitable cable (not supplied with the TV).
Note: To be able to watch an image in the HDMI mode, your computer must be equipped
with a HDMI graphic card.
You may display the resolution information by pressing the I button.
9.4.1-HDCP
Your TV supports HDCP feature. To use this feature, you must set up a connection to your TV
set's HDMI video port and select HDMI by pressing the AV key on your remote control.
NOTE: In HDMI mode; some resolutions are supported when a DVI to HDMI converter cable
from a PC is used. Only 16:9 and 4:3 are supported as picture format.
High Definition - HD-READY
Your television can receive high-definition signals (HDTV). You can connect the
input sources (HDTV set-top box or HDTV DVD player) to the (HDMI) socket
(digital HDTV signal). This ensures that you can view digital HDTV programmes,
even if they are copy-protected (HDCP High-Definition Copy Protection).
20 I
EN
DVD
SATALLITE RECEIVER
GAME CONSOLE