Chapter 2 Hardware Installation; Adsl Router Connection; Usb Installation - Tenda D840 User Manual

Chapter 2 Hardware Installation

2.1 ADSL Router Connection

1. Connect one end of the telephone line to the LINE
port of the D810R and the other end to the
MODEM port of the voice splitter.
2. Connect the power adapter to the PWR port of the
D810R.
3. Use an Ethernet cable to connect the LAN port
with the NIC of your computer.

2.2 USB Installation

To connect the device to the USB interface of the
computer, please follow the steps below:
1. Connect to the USB port of the D810R through a
USB cable.
2. Connect the other end of the cable to the
computer's USB port.
3. Set up the USB driver provided by the CD-ROM.
D840R ADSL2+ Router User Guide
4