Luxul XAP-1040 Quick Install Manual
  1. Manuals
  2. Brands
  3. Luxul Manuals
  4. Wireless Access Point
  5. Xen XAP-1040
  6. Quick install manual

Luxul XAP-1040 Quick Install Manual

High performance outdoor 802.11b/g/n wireless access point
Hide thumbs Also See for XAP-1040:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Quick Install Guide
Luxul High Performance Outdoor
802.11b/g/n Wireless Access Point
Use the XAP-1040 to:
Provide a High Performance Outdoor 802.11n Wi-Fi Network
„
Setup a Superior Point-to-Point or Point-to-Multipoint Bridge Link
„
Increase Mobile Client Device Network
„
Sensitivity and Performance
Simplify Installation While Minimizing Setup Time and Expense
„
Eliminate Client Device Roaming Issues
„
Simply Connected
XAP-1040

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XAP-1040 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Luxul XAP-1040

Summary of Contents for Luxul XAP-1040

  • Page 1 Simply Connected Quick Install Guide XAP-1040 Luxul High Performance Outdoor 802.11b/g/n Wireless Access Point Use the XAP-1040 to: Provide a High Performance Outdoor 802.11n Wi-Fi Network „ Setup a Superior Point-to-Point or Point-to-Multipoint Bridge Link „ Increase Mobile Client Device Network „...

  • Page 2: Document Conventions

    No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design. No license is granted, either expressly or by implication or otherwise under any Luxul intellectual property rights.

  • Page 3: Package Contents

    Because the signal generated by the XAP-1040 is directional in nature, the unit should be placed in a location that allows the antenna face to be “pointed”...

  • Page 4: Bottom View

    For troubleshooting, functional validation or system Reset, you will need to open the XAP-1040. To do so, remove the 4 screws at the back of the unit. After doing so, carefully lift the base up and to the right as demonstrated below: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450...

  • Page 5: Preparing For Installation

    Before removing the cover and/or attempting to service the CAUTION: XAP-1040, be sure to unplug all cables and dismount the device. Use caution to see that no external elements are introduced inside the enclosure and that reasonable precautions are taken to minimize static and electromagnetic contamination of the electronic components.
  • Page 6 At startup, the Green Power LED will stay on while the amber LAN Link light fl ashes. The blue LED will come on once the XAP-1040 wireless radio is active. 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450...

  • Page 7: Environmental Requirements

    Simply Connected Reset Button: The Reset button is used to clear the current settings of the XAP-1040 and restore factory default settings. To Restore the Default Settings: With the XAP-1040 powered on, press and hold the Reset button for 15 seconds. When the Power LED comes on again, release the reset button.
  • Page 8 XAP-1040 Suggested Mounting Location Mounting the Access Point on a Wall or Pole The XAP-1040 can be mounted directly to a wall or pole using the included mount- ing bracket. Once the mounting location has been selected, installation is as simple...

  • Page 9: Connecting To The Power Source

    Once the RJ45 Connector Gland has been assembled and the Ethernet Cable has been terminated, the cable can now be plugged into the XAP-1040. You can now at- tach the RJ-45 Connector Gland by placing it over the cable connector and turning it clockwise until it is fi rmly secured.

  • Page 10: Applying Power

    IP address of your Operating System. Login The XAP-1040 is not equipped with internal DHCP server. If connected to the Luxul XBR-2300 Enterprise Dual-WAN Router, configuration will be automatic. Otherwise, the IP address of the computer for login and configuration will need to be manually configured.

  • Page 11: Quick Setup

    “admin”), and then click “OK” to login to the Quick Setup window. Quick Setup For configuration instructions download the XAP-1040 User Guide from luxul.com. For any problems during the installation or configuration of your XAP-1040, contact support@luxul.com for help. To check for firmware updates visit http://luxul.com/firmware...

  • Page 12: Site Preparation

    „ and certified signal transmission. Information on this document supersedes all previous versions. Products and documents subject to change without notice. Products may be discontinued without notice. LUX-QIG-XAP-1040 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 0829141020 luxul.com | 801-822-5450...

Table of Contents