Frigidaire Monaco MWF-1/0304 Instructions & Operating Manual page 7

Always ensure the area to be drilled is free from hidden electrical wires, water and gas
•
pipes.
For installation of the fireplace, care must be taken not to damage concealed cables.
•
• Please be careful while drilling holes.
This fireplace is designed to be permanently fixed to a wall. Ensure the wall is sufficiently
•
strong enough to hold the weight of the fireplace. Brick or breeze block walls are ideal. If
positioning on plasterboard wall, it must be fixed to studs. If you are not sure if the wall is
stable enough, then consult a hardware expert. The wall bracket must be fixed
horizontally and the cable routed to the bottom right of the fireplace.
• A height of 2 feet from bottom of fireplace to floor is recommended for optimum viewing
of flame effect (see below figure for recommended fixed dimensions).
• Keep top of fireplace at least 3 feet away from ceiling or other objects for optimum heat
ventilation.
For optimum viewing, mark the top four screws fixing positions on wall in accordance
•
with the recommend fixing dimensions. (See figure on the next page. Drill holes with a
six drill bit.)
• Fix the wall bracket using the anchors and screws provided.
5