Hopper & Stacker; Prepare The Cleaning Roller - Ultra electronics ID Card Printer User Manual

Hopper & Stacker

Prepare the cleaning roller

Open printer, then:
A. Remove the cardboard transit piece.
B. Peel off carefully the protective layer from the
cleaning roller.
C. The cleaning roller is blue and has a tacky
surface.
ID Card Printer – User Manual
HOPPER: Insert the hopper into the aperture at the back of the printer
and click into place.
Always fan the
together befo
cards carefu
can affect th
ID Card Printer – User Manual
- 6 -
cards to ensure the cards are not sticking
re inserting into the hopper, and handle the
lly to keep the surfaces clean, as finger marks
e print quality.
STACKER: Insert the stacker into the
aperture in the front panel and click into
place. The stacker can hold up to 30, 20mil
to 40mil (0.51mm to 1.02mm) thick cards.
The printer can be operated without the
stacker.