Aiming Beam; Using The Color Camera - Honeywell Dolphin 60s Quick Start Manual

Aiming Beam

The aiming beam is narrower when you hold the terminal closer to a
bar code and the aiming beam is wider when you hold it farther from
the bar code.
The aiming beam must be aimed closer to symbologies that have
smaller bars or elements (mil size). The aiming beam must be aimed
farther from symbologies that have larger bars or elements (mil size).
Linear Bar Code
2D Matrix Symbol

Using the Color Camera

1. Tap > Demos
2. Point the camera lens at an object. The camera lens is located
on the back panel of the terminal.
3. Adjust the position of the camera lens to make sure that the
object is showing on the screen.
4. Press the ENT key or tap
Note: Tap the green arrow
Tap the green box
> Camera Demo
on the screen to take a picture.
to review or edit your pictures.
to exit the picture review/edit screen.
.