Resetting The Terminal - Honeywell Dolphin 60s Quick Start Manual

Mobile terminal
Hide thumbs Also See for Dolphin 60s:
Table of Contents

Advertisement

Resetting the Terminal

There are three types of system resets: a soft reset, a hard reset, or
a factory reset. The soft and hard resets preserve all data stored in
the file system. Contact a Honeywell technical support
representative for more information on how to perform a factory
reset.
Soft Reset (Warm Boot)
A soft reset re-boots the device and preserves any objects created in
RAM. You would perform a soft reset when: the terminal fails to
respond, after installing some software applications, or after making
changes to certain settings, such as network cards.
1. Press and hold the Blue key
approximately 6-7 seconds.
2. When the reset is complete, the Home screen displays.
Hard Reset (Cold Boot)
A hard reset re-boots the device and closes any open applications
running in RAM at the time of reset.
1. Press and hold the Blue key
approximately 6-7 seconds.
2. When the reset is complete, the Home screen displays.
and then Power key
and then Send key
for
for

Advertisement

Table of Contents
loading

Table of Contents