Aiming Beam - Honeywell Dolphin 70e Black Quick Start Manual

With windows embedded handheld 6.5

Hide thumbs Also See for Dolphin 70e Black:

Table of Contents

Using the Scan Engine Demo

1. Touch

2. Point the Dolphin terminal at the

bar code.

3. Press and hold the Scan button.

The aiming beam appears.

Note: The left and right side buttons also trigger the scan/image engine.

4. Center the aiming beam over the bar code.

Note: For optimum performance, avoid reflections by scanning the bar code

at a slight angle.

5. When the bar code is successfully decoded, the terminal beeps, and the

bar code information appears on the touch screen.

Aiming Beam

The aiming beam is narrower when you hold the terminal closer to a bar code

and the aiming beam is wider when you hold it farther from the bar code.

The aiming beam must be aimed closer to symbologies that have smaller bars

or elements (mil size). The aiming beam must be aimed farther from

symbologies that have larger bars or elements (mil size).

Linear Bar Code

2D Matrix Symbol

> Demos

> Scan Demo

Table of Contents