Installing A Memory Card - Honeywell Dolphin 60s Quick Start Manual

Installing a Memory Card

1. Suspend the terminal.
2. Unlock and remove the battery door.
3. Remove the battery.
4. Slide the latch toward the bottom of the ter-
minal to unlock the SIM card.
5. Lift the SIM card latch to reveal the SIM card.
6. Remove the SIM card to reveal the memory
card latch.
7. Unlock the memory card latch by sliding the
latch left.
8. Lift the latch to expose the MicroSDHC
socket.
9. Remove and discard the SD card blank and
replace it with the SD card you are installing.
10. Insert a MicroSD or MicroSDHC card into the
socket aligning the corner on the card with
the corner of the socket.
11. Close and lock the memory card latch by
sliding the latch right.
12. If you want to install a SIM card, insert it into
the SIM card socket (see
Card).
13. Close and lock the SIM card latch by sliding
the latch towards the top of the terminal.
14. Install the battery.
15. Install and lock the battery door. The termi-
nal automatically starts the power up
sequence.
Installing a SIM
Step 4
Step 5
Step 7
Step 10
Step 11
Step 11
cont.