CipherLab CP30 Reference Manual page 175

CP30 Mobile Computer
Convert RSS to
UPC/EAN
EAN/JAN
Enable EAN-8
Enable EAN-13
Bookland EAN (ISBN)
Enable Addons
Addons redundancy
EAN-8 extend
UCC coupon extended
code
UPC
UPC-A/UPC-E/UPC-E1
Enable Addons
Addons redundancy
166
Reference Manual
"Convert to UPC/EAN" only applies to GS1 Databar-14 and
GS1 Databar Limited barcodes not decoded as part of a
Composite barcode.
Convert to EAN-13
Strip the leading "010" from barcodes.
"01" is the Application ID and must be followed by a
single zero (the first digit encoded)
Convert to UPC-A
Strip the leading "0100" from barcodes.
"01" is the Application ID and must be followed by
two or more zeros (but not six zeros)
The EAN-13 barcode starting with 978 will be converted to
ISBN.
Decide whether to decode EAN-8, EAN-13, UPC-E0,
UPC-E1, UPC-A with addons.
Ignore Addons
Decode Only With Addons
Auto-discriminate
When "Auto-discriminate" is applied, decide the number of
times (2~30) of
barcode that makes a valid reading.
Read UPC-A barcodes starting with digit "5", EAN-13
barcodes starting with digits "99", and UPC-A/GS1-128
Coupon Codes.
UPC-A, EAN-13, and GS1-128 must be enabled first!
Use "Addon
auto-discrimination of the GS1-128 (right half) of a
coupon code.
For the default value, the UPC-A and UPC-E are enabled.
Decide whether to decode EAN-8, EAN-13, UPC-E0,
UPC-E1, UPC-A with addons.
Ignore Addons
Decode Only With Addons
Auto-discriminate
When "Auto-discriminate" is applied, decide the number of
times (2~30) of
barcode that makes a valid reading.
supplementary decoding
Redundancy"
supplementary decoding
No
---
Enable
Enable
Enable
Ignore...
10 times
the same
No
No
to control
---
Ignore...
10 times
the same