CipherLab CP30 Reference Manual page 162

Interleaved 25
Convert to EAN-13
Check digit verification Decide whether to verify the check digit. If desired, select
Transmit Check Digit
Select Length
(min/max)
Chinese 25
Code 39
Convert to Code 32
Code 32 Prefix
Check digit verification Decide whether to verify the check digit. If the check digit
Transmit Check Digit
Code 39 Full ASCII
Trioptic Code 39
Select Length
(min/max)
Code 93
Select Length
(min/max)
MSI
Check digit verification If Two Check Digits option is selected, an additional
Convert a 14-character barcode into EAN-13 if the
following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
"Check digit verification" must be disabled.
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS check digit
OPCC check digit
Decide whether to include the check digit in the data being
transmitted.
One or two fixed lengths
Range (1~55)
Convert to Italian Pharmacode.
Prefix character "A" to Code 32 barcodes.
is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data being
transmitted.
" Check digit verification " must be enabled.
Code 39 Full ASCII includes all the alphanumeric and
special characters.
Decide whether to decode Trioptic Code 39.
Trioptic Code 39 is a variant of Code 39 used in the
marking of computer
contains six characters.
One or two fixed lengths
Range (1~55)
One or two fixed lengths
Range (1~55)
verification is required to ensure integrity. Select one of
the algorithms below. If the check digit is incorrect, the
barcode will not be accepted.
Appendix II
tape cartridges. It always
Laser (SE955)
Enable
No
No
No
4~55
Enable
Enable
No
No
No
No
No
No
4~55
Enable
4~55
Enable
Single Modulo
10
153