Compuprint 914N User Manual page 66

Chapter 3
Single Sheet (ASF)
The Single Sheet can be loaded from the ASF automatically when the
the
FEED/↑, LOAD-PARK/→
following conditions are performed:
K
Printer in Off-line status.
K
Paper empty condition.
K
The friction release lever is set at the Friction position.
K
Printer in Auto Sheet Feeder mode.
When the Auto Paper Loading function is performed, the printer first tries to
load the single sheet from the manual insertion slot if the printer does not detect
paper, the printer automatically performed the Auto Paper Loading from the ASF.
Fanfold Paper (Push tractor)
The fanfold paper can be loaded into the printer automatically when the
↓ or the
FEED/ LOAD-PARK/→
performed
:
K
Printer in Off-line status.
K
Paper empty condition.
K
The friction release lever is set at the Tractor position.
F
If the Auto Paper Loading fails, a paper jam error (the ERROR
indicator blinks) or a paper empty error will occur (the ERROR
indicator blinks and the buzzer sounds). Make sure that all three
above conditions have been performed and then try to load the
paper again.
Auto Loading Position Adjustment Mode
In the Auto Paper Loading mode, the paper load position is set at the factory
default position. However, you can adjust the position by following the procedure:
1.
Press the
Adjust the Auto Paper Loading position by pressing the
LINE FEED/ ↑
with the
key (during the adjustment,the ON LINE/ERROR and MENU indicators are
blinking.)
3.34
or the
FORM FEED/
key is pressed and the following conditions are
key to perform the Auto Paper Loading.
LOAD-PARK/→
key or the
ON LINE/←
A78401740-001
↓
key is pressed and the
TOF
ON LINE/←
key together with the
LINE
FORM
key together
/ ↓
FORM FEED