Moving Within The Printer Setup; Function Selection Mode; Value Selection Mode; Leaving The Printer Setup - Compuprint 914N User Manual

Chapter 3
27 BUZZER
28 IBM CHARACTER SET
29 CODE PAGE
30 IBM AGM MODE
50 INTERFACE
When the printing is complete, the printer enters the Setup mode.

Moving within the Printer Setup

Function Selection Mode

Press the
ON LINE
function blinks). Press the
When you wish to confirm the displayed function, press the
the displayed function will be selected (it stops blinking) and enter the Value
Selection Mode.

Value Selection Mode

Press the
LOAD-PARK
function value blinks). Press the
values. When you wish to confirm the displayed value, press the
the displayed value will be selected (it stops blinking) and enter the Function
Selection Mode

Leaving the Printer Setup

When you wish to leave the current Printer Setup procedure, press the
PITCH/EXIT MENU
the Setup mode.
The Setup procedure allows the selection of the following printer functions:
K
Default Set Selection
K
User Selection
K
User Change Selection
K
Emulation Types
K
Form and Line Length
K
Line Spacing
3.10
←
/ key to enter the Function Selection Mode (the displayed
↑ ↓
or keys to scan the functions forwards or backwards.
→
/ key to enter the Value Selection Mode (the displayed
↑
key, the new function/value settings will be stored and you exit
A78401740-001
01 VALID
01 SET 1
01 USA (#437)
02 INVALID
01 PARALLEL
↓
or keys to scan forwards or backwards the
key,
LOAD-PARK/→
←
/ key,
ON LINE