Compuprint 914N User Manual page 118

Appendix A
This command cancels the Most Significant Bit control set by ESC = or ESC > .
ESC SP {n}
This command sets the intercharacter space to n/120 inch in Draft and n/180
inch in Quality.
ESC $ {n} {m}
The dot position is calculated as {m}*256+{n}.
ESC \ {n} {m}
This command sets the relative dot position, so that the print head is moved to a
dot position specified relative to its current position. The unit of the dot is 1/120
inch. The Right Side position is calculated as {m}*256+{n}. The Left Side
position as 65536-{m}*256+{n}.
ESC d {n} {m}
This command causes the print head to be moved to a dot position calculated as
{n+m*256}/120 inch on the right of its current dot position. If the selected position
is outside the current right margin, it is forced to last column.
A.34
Sets intercharacter space (only EPSON mode).
1B 20 {n}
27 32 {n}
0 ≤ n ≤ 255
Sets absolute dot position (only EPSON mode).
1B 24 {n} {m}
27 36 {n} {m}
0 ≤ n, m ≤ 255
Sets relative dot position (only EPSON mode).
1B 5C {n} {m}
27 92 {n] {m]
0 ≤ n, m ≤ 255
Spaces forwards relative dot position only(only IBM
mode).
1B 64 {n} {m}
27 100 {n} {m}
0 ≤ n, m ≤ 255
A78401740-001