Compuprint 914N User Manual page 48

Chapter 3
Function 21 SELECTION OF RAM
Selects the capacity of the input buffer. (Selects the download command
enable/disable.)
01 PRINT BUFFER
02 DOWNLOAD BUFFER
Function 22 ASF
Selects the ASF installed or not installed.
01 NOT INSTALLED
02 INSTALLED
Function 23 RIBBON MODE
Selects the black ribbon.
01 BLACK RIBBON
Function 24 AUTO TEAR OFF
Selects the timing for the auto tear-off function (in seconds).
01 INVALID
02 VALID (1 SEC)
03 VALID (3 SEC)
04 VALID (15 SEC)
Function 25 TEAR OFF POSITION
Specifies a tear off condition.
01 TOF POSITION
(when the paper is placed at the TOF position, a tear-off is carried out)
02 ANY POSITION
(any Position,regardless of paper position, a tear-off is always carried out)
Function 26 PAPER INITIALIZATION
Selects fanfold paper initialization. If the paper has already been loaded
when the power is turned ON. The printer will park and then auto-loads the
paper to the initial printing position, this function is only valid in Push
Tractor Mode.
01 OFF
02 ON
3.16
A78401740-001