Advertisement
Visual and audio indication of handheld unit for RF transmission
Successful Transmission
Audio (Beeper)
Yes
No
Three beeps
RF communication as clusters
Cluster 1
¡
Default setting of Cradle
Firmware version of Cradle
Show channel information of Cradle
Configuration alphanumeric entry barcode
0
1
2
RF communication setting for handheld unit
Option barcode
Handheld unit RF channel No.
Handheld unit ID
Note: 1. See "HR2280/2180 series User Manual" for more information. 2. For better readability, please print this document with laser printer. 3. Version: 1.1.11.
Red LED on handheld unit
None
Off
On
Cluster 2
Default setting of Handheld unit
Firmware version of Handheld unit
Show channel information of handheld
¡
unit
5
3
6
4
7
SETUP
Option
Alpha. entry
01-08
01-08
06*
01-16
01-16
RF communication setting for cradle
Option barcode
Cradle RF channel No.
Bind the first handheld unit ID
Join a next handheld unit ID
Note: 1) The factory default settings are indicated with asterisks (*);
2) The settings indicated with (
mode.
Cradle entering upgrade ready mode
Keep pressing the S button on the cradle, until the blue LED is flashing. Then three LEDs
will all be turned ON, this indicates the cradle being upgrade ready mode.
8
9
01*
END
SETUP
Option
Alpha. entry
¡
01-08
01-08
06*
¡
01-16
01-16
01*
¡
01-16
01-16
END
¡
) are valid only when the cradle is in
upgrade ready
Advertisement
