JVC SR-VS30U Instructions Manual page 49

Filename [VS30U_2-EN.fm]
VS30U_2-EN.fm Page 49 Thursday, January 31, 2002 3:38 PM
NOTES:
You can program each deck to timer-record as many as 6
programs. If you try to program the VCR to record a seventh,
"FULL" appears on the front display panel. To record the extra
program, you must first cancel any unnecessary programs
( pg. 50).
If "Err" appears on the front display panel, repeat the steps on
page 48 again.
When a menu screen is shown, you cannot use 24HR Quick
Programing function. Press MENU to return to normal screen,
and try again.
You can use 24HR Quick Programing function also when the
VCR is turned off.
For 24HR Quick Programing function, the program overlap
warning display does not appear even if some programs
overlap each other. The program with the lower program
number will be recorded and the other one will not be
recorded correctly.
It is not possible to timer-record the same program on both the
VHS deck and the DV deck simultaneously.
During timer recording, it is not possible to change the
recording deck (VHS or DV).
If the times that are programed for recording on the DV deck
and on the VHS deck overlap, the earlier start time takes
precedence. If the start times are the same, the VHS deck takes
precedence.
If you perform 24HR Quick Programing during recording or
Instant Timer Recording (ITR), press TIMER to engage the timer
mode after the recording (or ITR) is finished.
Page 49
Masterpage:Right-NoTitle0
49
EN
January 31, 2002 3:37 pm