On-Screen Display (For Vhs Deck) - JVC SR-VS30U Instructions Manual

Filename [VS30U_1-EN.fm]
VS30U_1-EN.fm Page 10 Thursday, January 31, 2002 3:33 PM
10
EN

ON-SCREEN DISPLAY (for VHS deck)

If you press DISPLAY/OSD on the Remote when "SUPERIMPOSE" is set to "ON" (
indicators appear on the TV screen.
A Operation Mode Indicators
B Tape Speed SP/EP
C Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you're not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press CANCEL on the Remote.
D Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW (
3
or FF ( ) from the Stop
5
mode or perform an Index
Search ( pg. 30). The
position of " " in relation to
q
"B" (beginning) or "E" (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
Page 10
)
Beginning End
pg. 71), various operational
E Index number pg. 30
F Tape Remaining Time Indicator
G Counter Display pg. 33
H Audio Mode Display
I VHS Indicator
J SAP Indicator pg. 34
K Stereo program Indicator
L Day/Clock Display
M Channel Position Number/
Auxiliary Input Indicator (L-1 or F-1)
Dubbing Direction Indicators
(DV VHS) pg. 52
]
N "Cassette Loaded" Mark
To recall an indication
A Press DISPLAY/OSD.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
B Press DISPLAY/OSD again to clear the display.
The RECORD/PAUSE indication remains on the screen.
Masterpage:Left
INDEX (cont.)
pg. 31
pg. 34
January 31, 2002 3:21 pm