Tuner Set; Auto Channel Set - JVC SR-VS30U Instructions Manual

Filename [VS30U_1a-EN.fm]
VS30U_1a-EN.fm Page 18 Thursday, January 31, 2002 3:35 PM
18
EN

Tuner Set

Turn on the TV and select the AV mode.
T
1
4
7
1
INFORMATION
The VCR selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be
displayed on the right side of "BAND" on the Tuner Set
screen.
Page 18
W
2 3
2
5 6
8 9
0
4
DV S-VHS
INITIAL SETTINGS (cont.)

Auto Channel Set

Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Turn on the VCR.
Press POWER.
B
Access the Main Menu screen.
Press MENU.
C
Access the Tuner Set screen.
Press to move the
rt
highlight bar (arrow) to
"TUNER SET", then press OK
or .
e
D
Perform Auto Channel Set.
Press to move the
rt
highlight bar (arrow) to
"AUTO CH SET", then press
OK or . You can
e
automatically set the
receivable channels in your
area in the order of their
frequencies.
When Auto Channel Set is
complete, "SCAN
COMPLETED" appears on the
TV screen.
If the scan was unsuccessful,
"SCAN COMPLETED–NO
SIGNAL–" appears on screen.
Check the connections and start
again.
E
Return to the normal screen.
Press MENU.
Masterpage:Left
January 31, 2002 3:35 pm