JVC SR-VS30E Instructions Manual page 49

A
If the camcorder has no S-VIDEO output connector ...
Recorder
Mini-plug cable
(not provided)
(JVC camcorder only)
EDIT
Camcorder
AUDIO OUT
VIDEO OUT
Player
C
If the camcorder has a DV IN/OUT connector ...
Recorder
DV IN/OUT
DV cable (VC-VDV204)
(not provided)
DV IN/
OUT
Camcorder
EDIT
Player
Simultaneous Dubbing
It is possible to perform recording simultaneously on both the VHS deck and the DV deck from the same external input.
A Press AUX (number key "0") and /or PR to select the appropriate input mode depending on the connectors being used.
B Press DV to select the DV deck. Press and hold
C Press VHS to select the VHS deck. Press and hold
D Engage the Play mode of the connected device.
4
E Press
to start recording on both the VHS deck and DV deck.
8
F Press
to stop recording on the VHS deck.
G Press DV to select the DV deck, then press
NOTE:
It is not possible to record a TV programme on both the VHS deck and the DV deck simultaneously.
VIDEO input
1 3 2
PAUSE
connector
AUDIO input
Audio cable
(not provided)
Video cable
(not provided)
1 3 2
PAUSE
connector
Mini-plug cable
(not provided)
(JVC camcorder only)
9
and press
9
8
to stop recording on the DV deck.
B
If the camcorder has an S-VIDEO output connector ...
Recorder
Mini-plug cable
(not provided)
(JVC camcorder only)
Camcorder
Player
NOTES:
About DV IN/OUT connector
● To output digital signal when dubbing from the VHS deck to
other device through the DV IN/OUT connector, press
then press 4 to start playback on the VHS deck.
● To input digital signal when dubbing from other device to the
VHS deck through the DV IN/OUT connector, press
and then press 7 to start recording on the VHS deck.
,
VHS
● It is possible to control the DV deck from the AVC protocol-
equipped device that is connected to the DV IN/OUT
connector. To control the VHS deck, use the buttons on this
recorder and the remote control.
● All necessary cables can be obtained from your dealer.
● When you select "EDIT" to dub tapes in step 4, be sure to select
"AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you
finish dubbing the tapes.
● When you are editing through the DV IN/OUT connector, the
recorder will stop if the signal is interrupted.
● When connecting this recorder to a device equipped with a DV
input connector, be sure to use the optional DV cable
(VC-VDV204).
7
so that the DV deck enters the Record Pause mode.
7
and press so that the VHS deck enters the Record Pause mode.
S-VIDEO input
1 3 2
PAUSE
connector
AUDIO
input
EDIT
Audio cable
(not provided)
S-Video cable
AUDIO OUT
(not provided)
S-VIDEO OUT
49
EN
,
and
then