Express Timer Programming - JVC SR-VS30E Instructions Manual

38
EN
Express Timer
Programming
If you do not know the S
HOW
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
Before performing Express Timer Programming:
Make sure that the recorder's built-in clock is set properly.
Turn on the TV and select the AV mode.
1
2
1
4
7
1
2
V number for the programme
IEW
2 3
5 6
3
8 9 4
4
0
3
TIMER RECORDING (cont.)
A
Turn on the recorder.
Press .
1
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to "REC".
C
Select the deck.
Press VHS or DV.
D
Access the S
HOW
Press PROG.
E
Access the Programme screen.
Press START+/–. (If you're
just starting out, "P1"
appears.)
The front display panel looks like this:
F
Enter the programme start time.
Press START+/– to enter the
time you want recording to
start.
Press and hold START+/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
The front display panel looks like this:
G
Enter the programme stop time.
Press STOP+/– to enter the time you want recording to
stop.
Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
V screen.
IEW