JVC SR-VS30E Instructions Manual page 42

42
EN
1
2
1
4
7
1
2
Check, cancel and change programmes
A
Disengage the timer mode.
Press (TIMER), then press
#
B
Access the Programme Check screen/display.
Press .
"
The Programme Check screen
or display appears for the deck
(VHS or DV) being selected.
2 3
5 6
3
8 9
4
4
0
3
.
1
TIMER RECORDING (cont.)
C
Access the Programme screen/display.
Press again to check
"
more information. Each time
you press , the next
"
programme's information
appears.
The front display panel shows the programme start time. Pressing
OK changes the display to the programme stop time, then the
date and the channel position.
To cancel or change a programme...
D
Cancel or change a programme.
Press to cancel a programme. To change programme
&
settings, press the appropriate button: START+/–,
STOP+/–, DATE+/–, PR+/–, VPS/PDC and/or SP/LP
( ).
p
You can change "TV PROG" to "SAT" for the channel position
by pressing the number key "0".
E
Return to the normal screen/display.
Press as many times as necessary. If there are still
"
some programmes remaining, go to step 6.
F
Return to the timer mode.
Press (TIMER).
#
NOTE:
You can also check the programmes on the front display panel
even if the recorder's power is off (unless the recorder is in the
Power Save mode pg. 69) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.