Yamaha Star XVS13CB(C) Owner's Manual page 22

U27D11E0.book Page 5 Monday, July 11, 2011 11:15 AM
INSTRUMENT AND CONTROL FUNCTIONS
Odometer, tripmeters, fuel reserve
tripmeter, fuel meter and clock
1
4
1. Odometer/tripmeter/fuel reserve tripme-
ter/fuel meter/clock
Push the "SELECT" switch to change
the display between the odometer
mode "Odo", the tripmeter modes "Trip
1" and "Trip 2", the fuel meter mode,
and the clock mode in the following or-
der:
Odo → Trip 1 → Trip 2 → Fuel meter →
Clock → Odo
TIP
Push the "RESET" switch for less than
one second to display the clock for five
seconds, regardless of the currently se-
lected display mode.
If the fuel level warning light comes on
(see page 4-2), the display will auto-
matically change to the fuel reserve
tripmeter mode "Trip F" and start count-
ing the distance traveled from that
point. In that case, push the "SELECT"
switch to change the display between
the various tripmeter, odometer, fuel
meter, and clock modes in the following
order:
Trip F → Trip 1 → Trip 2 → Fuel meter
→ Clock → Odo → Trip F
To reset a tripmeter, select it by push-
ing the "SELECT" switch, and then
push the "RESET" switch for at least
one second. If you do not reset the fuel
reserve tripmeter manually, it will reset
itself automatically, and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
4-5
Fuel meter
1 2
1. Fuel meter
2. Segment
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards "E" (Empty) as the fuel level
decreases. When the fuel meter chang-
es from two segments to only one seg-
ment, approximately 5.0 L (1.32 US gal,
1.10 Imp.gal) of fuel remains in the fuel
tank. Be sure to refuel as soon as pos-
sible.
TIP
If the display is showing another func-
tion when this occurs, the display will
automatically change to the fuel meter
mode.