Simrad Axis 200 User Manual page 4

© 2004 Simrad Ltd
The technical data, information and illustrations contained in this publication were to the best of our knowledge correct at the time of going to print. We
reserve the right to change specifications, equipment, installation and maintenance instructions without notice as part of our policy of continuous devel-
opment and improvement.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, electronic or otherwise without prior permission
from Simrad Ltd.
No liability can be accepted for any inaccuracies or omissions in the publication, although every care has been taken to make it as complete and accurate
as possible.
IV
Part No. E02066 Issue 4.0 12/05/04 CR