Rear Arm - Subaru LEGACY 2004 Service Manual

REAR SUSPENSION

4. Rear Arm

A: REMOVAL
1) Lift-up the vehicle, and then remove the rear
wheels.
2) Remove the sub frame support arm.
<Ref. to RS-21, REMOVAL, Sub Frame Support
Arm.>
3) Remove the bearing unit.
<Ref. to DS-19, REMOVAL, Rear Hub Unit Bear-
ing.>
4) Hang the back plate from sub frame.
5) Remove the bolts which secure the parking
brake cable clamp to rear arm bracket.
6) Remove the bolt which hold the brake hose
bracket and ABS wheel speed sensor bracket to
rear arm.
Rear Arm
7) Remove the bolts which secure the brake hose
bracket to rear arm. Remove the bolts which se-
cure the ABS wheel speed sensor to rear arm.
8) Remove the stabilizer link from rear arm.
RS-00043
9) Remove the shock absorber from rear arm.
RS-00040
10) Support the rear arm horizontally using a trans-
mission jack.
RS-00041
RS-10
RS-00124
RS-00044
RS-00045
RS-00046