Spring Air Systems KES Enviro Operation And Maintenance Manual page 14

RPD10 or RPW10 LOGO with Override selector in on position
System Reset:
After any of the safety circuit annunciation, the system must be reset. The system is reset by toggling the
"RESET" switch in the LV10 J-box, or switching the OVERRIDE SWITCH on the RPW10 or RPD10, or
turning the fan selector switch to the "OFF" and then to the "ON" position.
Service
Filters
Within
4 hours
LOGO!
Figure 17
Logo Processor
Figure 18
Enviro Maintenance Manual 2004
AUX!