S E C T I O N 4 . 2 - W I R I N G A T T A C H M E N T - WILSON AUDIO Sophia Series 2 Owner's Manual

8 - Spikes with Hex Nut
8 - 1" Brass Spike Pad
1 - 5/32" Allen Wrench
1 - 9/16" Combination Wrench
1 - 1/2" Nut Driver
1 - 3/16" Long Arm Allen Wrench
1 - Polishing Cloth
S e c t i o n 4 . 2 - W i r i n g A t t a c h m e n t s
Very high quality binding post connections are provided to facilitate con-
necting Sophia to your amplifier. Locate the 1/2" nut driver from your tool kit.
Attach the main output from the amplifier to the binding posts located on the bot-
tom rear of the Sophia. Use the 1/2" nut driver to tighten the binding posts. Do not
overtighten.
Please follow the setup instructions outlined in Section 4 to find the position
for your Sophias in your room. It is recommended that Sophias be placed in their
final position before installation of the spikes.
S 4 - F
E C T I O N I N A L
S
E T U P
37