WILSON AUDIO Sophia Series 2 Owner's Manual page 53

If the problem is solved:
If the problem persists:
S
E C T I O N
Turn the amplifier off and disconnect it
from the AC wall outlet. Disconnect the
speaker cable leads to the amplifier and
turn the amplifier on again.
There is a short in the speaker cables.
Check for frayed ends, holes (from spike
feet), or make sure that the spade lug is
not touching the chassis while it is con-
nected to the binding post.
Call the dealer where the amplifier was
purchased. There appears to be a prob-
lem with this component.
6 - T
R O U B L E S H O O T I N G
53