WILSON AUDIO Sophia Series 2 Owner's Manual page 39

bottom of the Sophia. Do not overtighten.
3. Screw the spike (with nut) all the way in until it just touches the bolt. Do
not tighten the nut at this time.
4. Repeat steps 1 through 4 with the other spikes.
5. Using a bubble level, adjust the spikes so that the Sophia is level and so
that all of the spikes are making equal contact to the hard surface
beneath.
6. Once the Sophias are level, tighten the nut on the spike to the diode
using the 9/16" wrench provided in the Sophia tool kit. DO NOT OVER-
TIGHTEN!
The spikes, installed properly, isolate the Sophia from the floor surface,
reducing resonances. They also provide a stable platform for the Sophia to launch
bass energy. The result is cleaner, faster, more dynamic bass, with improved
extension and linearity.
S 4 - F
E C T I O N I N A L
S
E T U P
39