Table of Contents
Advertisement
Update Selected
Server
Add as new Server
Delete
Clear Form
Defining your own Servers
If the type of Server you wish to use is not listed on the Port Forwarding screen, you can define and
manage your own Servers:
Create a new Server:
Modify (Edit) a Server:
Delete a Server:
Connecting to your Servers
Once configured, anyone on the WAN or Internet can connect to your Servers. They must use the
WAN (Internet) IP Address of WAP-4050:
e.g.
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address, rather than Dynamic. However, you can use
the Dynamic DNS feature, described in the following section, to allow users to connect to your Port
Forwarding using a URL, rather than an IP Address.
3.3.3 DDNS
This free service is very useful when combined with the Port Forwarding feature. It allows Internet
users to connect to your servers using a URL, rather than an IP Address.
Update the current entry, using the data shown in the Properties area
on screen.
Add a new entry to the list, using the data shown in the Properties
area on screen. The entry selected in the list is ignored, and has no
effect.
Delete the current Server entry. Note that the pre-defined Servers
cannot be deleted. Only Servers you have defined yourself can be
deleted.
Clear all data from the Properties area, ready for input of a new entry.
1.
Click Clear Form.
2.
Enter the required data, as described above.
3.
Click Add.
4.
The new Server will now appear in the list.
1.
Select the desired Server from the list
2.
Make any desired changes (for example, change the
Enable/Disable setting).
3.
Click Update to save changes to the selected Server.
1.
Select the entry from the list.
2.
Click Delete.
Note: You can only delete Servers you have defined.
Pre-defined Server cannot be deleted.
- 38 -
Advertisement
Table of Contents
