Safety Time; Beeper Intensity - Datalogic PowerScan D8330 Reference Manual

Enter Configuration
Ì$+;Î

* very low intensity
ÌBG0ZÎ
medium intensity
ÌBG2`Î
* This sets the beeper OFF for data entry, while for all other beeper signals it has the
meaning "very low intensity". The Beeper Intensity parameter is effective for all operating
conditions described in par. 7.6.
86
READING PARAMETERS

SAFETY TIME

safety time
ÌBE&Î
Limits same code consecutive reading.
Read 2 numbers in the range 00-99:
00 = no same code consecutive reading until reader is
removed (no decoding) for at least 400 ms.
01-99 = timeout from .1 to 9.9 seconds before a consecutive read
on same code.
 safety time = 0.5 sec
See par. 5.6.5 for details.

BEEPER INTENSITY

Exit and Save Configuration
Ì$-?Î
low intensity
ÌBG1]Î
 high intensity
ÌBG3cÎ