Enter Configuration
Ì$+;Î
Read the desired family code
Code 128
ÌAI11=Î
control without transmission of
check digit
EAN 128
ÌAI21@Î
control without transmission of
check digit
Code EAN 128 uses the ASCII <GS> character to separate a variable length code field from the
next code field. This character can also be transmitted before the code.
disable
ÌEQ0qÎ
If the <GS> character has been modified in the Character Replacement parameter, the new
character is affected by this command.
The code length selection is valid for the entire Code 128 family and is calculated on the
output string.
Read the code + 4 numbers for the code length where:
First 2 digits = minimum code length.
Second 2 digits = maximum code length.
The maximum code length is 99 characters.
The minimum code length must always be less than or equal to the maximum.
Examples: 0199 = variable from 1 to 99 digits in the code. 1010 = 10 digit code length only.
CODE SELECTION
CODE 128 FAMILY
disable the family
ÌAI0]Î
Transmit GS Before Code
CODE LENGTH (optional)
Exit and Save Configuration
Ì$-?Î
ISBT 128
ÌAI31CÎ
enabling ISBT 128 automatically
disables Puzzle Solver™.
enable
ÌEQ1tÎ
set code length
ÌAILJÎ
103