12. Prompt of key tone
a. Press "Record" or "Shutter" key once in normal using, Bravo will tick once to indicate the e ective
operation;
b. When stopping video recording, Bravo will tick twice;
c. Bravo will tick twice to indicate the successful code pairing;
d. Press "Shutter" key in video recording, Bravo will not give prompt;
e. When operating on TFT display screen, press "Menu" key in preview state, press ">" or "<" key to
enter the menu "Setup", press "+" or "-" key to select the menu "Key Tone", and then you can turn
on or turn o the key tone;
f.
If the system is in video recording, press "Stop" key on the remote control once, Bravo will tick twice
to indicate the video recording stopping;
g. If the system is in video recording, press "Shutter" key on the remote control once, Bravo and horn on
TFT display screen will not give any prompt;
h. Press any key on the remote control in standby state, Bravo will tick once to wake up the main system;
13. Prompt of laser light
a. After starting up, long press "Record" key for 3s in any state, the system will lighten the laser light;
b. Long press "Record" key for 3s when turning on laser light, the system will turn o the laser light;
c. The laser light turning on/o also can be operated in standby state;
d. The wireless remote control can execute laser light turning on/o operation;
Note:
The function of long pressing "Record" key for 3s to turn on/o laser light does not interfere with the
setting of turning on "Laser Synchronous Shooting" under the camera parameter setting.
14. Turn On/O TFT Display
a. In any status, long pressing Shutter key for 3 second to turn on or o TFT display;
b. TFT display can't be turned on or o by pressing Shutter key on remote control;
-23-