Coleman Bravo CXS2WP Instructional Manual page 16

Note:
The current actual segment le is determined by the le size set, but not determined by the true
time, that is to say, the le will be segmented more than 15/30 minutes at a dark environment.
e. Auto standby: Select the auto standby time of 0, 2 minutes, 5 minutes or 10 minutes. In case of no
any mission and operation after selecting, the system will start timing and Bravo will turn o
and output to enter the standby mode at the end of the time set. If there is any operation in timing,
the system will re-time.If the video recording or shutter is operated in the standby process, Bravo will
be waked up. The default standby time is 5 minutes when selecting to restore the factory default;
f. TV output format: NTSC or PAL; the video format outputted to TV can be selected. If the selected
format is changed, please unplug the AV cable and then reinsert it to update the parameters;
g. Format: After con rming that all les recorded are not needed to be saved, all les can be removed by formatting.
Note:If there is no card inserted, the memory of the machine will be formatted; after inserting card,
the system will format the card inserted, but not format the memory of the machine;
h. Factory default: The operation restores the parameter settings to factory default. After restoring, the system will
set the display mode of submenu of the "Menu" in English state. Press "M" key to enter the menu selection,
press "<" or ">" key to enter the menu "Setup", press "-" key to select the option "Language", and then it can
set in Chinese state. The system will set the time at 2011.01.01 after restoring factory default;
i. Language: "English", "Simpli ed Chinese" or "Traditional Chinese" can be selected via left or right key;
j. Light source frequency: Select the light source frequency 50Hz or 60Hz, depending on local grid
frequency, in order to avoid the screen ickering in preview mode or in video recording;
k. Date/Time: Time can be adjusted and changed. It will be displayed on the bottom right corner of the
video le or photo le when recording or shooting;
Note:
To press "M" key under the submenu may exit from it;
-13-
input