Coleman Bravo CXS2WP Instructional Manual page 18

the message "Insu cient Memory" on TFT display screen, and go back to the preview mode. The
video recording duration on LCD segment screen also will be stopped displaying;
d. In cyclic recording mode, the system will auto save a le every 15 minutes .
e. After it is fully charged, it can continuously record time is about 2.5 hours; The continuous voice
recording time is about 3 hours;
f. In voice control mode, the system will start recording when the environmental voice is higher than
65dB and the green indicator will twinkle slowly; if the environmental voice is lower than 65dB and
it lasts for 2 minutes, the system will auto save the 2-minute le recorded, the green indicator will be
o , the red indicator will remain bright (the corresponding record stopping prompt will be displayed
on LCD segment screen), and it returns to the preview state;
g. To press "+" or "-" key in voice recording mode cannot execute voice increasing/reducing operation;
however, to press "+" or "-" key when recalling audio le can execute voice increasing/reducing operation;
h. Connect the machine to high-de nition display device with HDMI cable in preview state, the basic
operation of the machine can be nished on the high-de nition display device; however, the digital
zoom function cannot be realized in 720P/960P/1080P mode;
4. Photo shooting
You can set the image resolution before shooting photos. Press "M" key to enter the setup interface,
pres ">"or "<" key to move the cursor to "
key to enter the resolution setup menu. There are three resolution modes available for your selection:
• 3M: Photo shooting resolution of 2048x1536;
• 5M: Photo shooting resolution of 2592x1944;
• 8M: Photo shooting resolution of 3200x2400;
a. Single shoot:
In preview mode, press "Shutter" once to shoot a photo with a "Click" sound, and the frontal red
", select the menu "Image Resolution", and press "OK"
-15-