Coleman Bravo CXS2WP Instructional Manual page 23

another case, please check the DPOF compatibility with the digital photo developing shop.
(3) If the DPOF information of the Micro SD card has been set by another camera, please do not insert
this card into Bravo to reset the DPOF information, or the DPOF information may be invalid or covered.
Sometimes, special photo types make it impossible to set the DPOF information.
7. Remote control
You can use the attached remote control of Bravo to control the video recording, photo shooting,
stopping and laser function turning on/o . The red indicator on the remote control will twinkle once
when you press any of the following keys:
Please follow the steps below to code the remote control before use to realize the correspondence of
remote control and Bravo:
1. Turn o Bravo, press and hold "Record" key, turn the power switch to "ON", and then release "
Record" key. Press both "Record" and "Stop" key on the remote control once within 3s to nish the
remote control code pairing process. Bravo will tick twice after coding the remote control successfully.
Note:
a. Use wireless remote control to control Bravo can check whether the code pairing is successful. The
control functions include: Video recording starting/stopping, photo shooting, waking in standby
mode, and laser light turning on/o ; Bravo will tick once for each operation. In case of video
recording stopping or laser light turning o , Bravo will tick twice;
-20-