Download Print this page

Advertisement

Quick Links

About this Manual
Congratulations on purchasing the Coleman DV6000AF Sports & Action Camera! The
contents of this manual are subject to change without notice. Note that the example
screens and product illustrations shown in this User's Guide may differ somewhat from the
screens and configuration of the actual camera.
Copyright
This manual contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic
or other means, in any form, without prior written permission of Elite Brands Inc. ©.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful interference and
(2)
This device must accept any interference received, including interference that

Advertisement

loading

Summary of Contents for Coleman CX14WP

  • Page 1 About this Manual Congratulations on purchasing the Coleman DV6000AF Sports & Action Camera! The contents of this manual are subject to change without notice. Note that the example screens and product illustrations shown in this User’s Guide may differ somewhat from the screens and configuration of the actual camera.
  • Page 2 may cause undesired operation. CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Camera Information • Do not disassemble or attempt to service the camera yourself. •...
  • Page 3 Battery Information • Turn off the camera before installing or removing the battery. • Use only the provided batteries or type of battery and charger that came with your camera. Using other types of battery or charger may damage the device and invalidate the warranty.
  • Page 4 resulting in camera malfunction. • The battery door must be closed securely and the lock engaged in order for the camera to be waterproof. Failure to do this can allow water to enter the camera and damage it. The camera can shoot images underwater at a depth of 3m (10ft) for up to 60 minutes.
  • Page 5 Notes about Opening and Closing the Battery Door x Make sure the camera and your hands are not wet. x Make sure that there are no debris inside the battery-chamber or memory card slot. x Make sure that the battery cover is firmly closed and the security lock is in the lock position.
  • Page 6 Turn the Product Off before Removing or Disconnecting the Power Source or Memory Card Do not remove the battery while the product is on, or while images are being saved or deleted. Forcibly cutting power in these circumstances could result in loss of data or cause damage to the memory card or internal circuitry.
  • Page 7 completely, and may reduce battery performance. Note that the battery may become hot after use; wait for the battery to cool before charging. When charging the battery inserted into this camera using the Charging AC Adapter or a computer, the battery is not charged at battery temperature below 5°C (41°F) or above 55°C (131°F).
  • Page 8 After making sure that there are no water droplets on the camera, open the battery cover and use a soft dry cloth to gently wipe off any water or sand remaining on the waterproof packing or inside the camera. If the cover is closed when the inside is wet, this could cause condensation or a malfunction.
  • Page 9: Led Indicator

    LED INDICATOR SPEAKER CHARGING INDICATOR DISPLAY DOWN...
  • Page 10 POWER / MODE LED INDICATOR MICROSD SLOT OK / ENTER LENS USB PORT HDMI OUTPUT...
  • Page 11 WATERPROOF CASE LATCH POWER / OK / ENTER MODE LENS DOWN MOUNT...
  • Page 12 Operating Guide 1. Inserting / Removing a Memory Card Ensure the camcorder is powered off. Insert a MicroSD card into the MicroSD card slot. The MicroSD card can only be inserted one way. Do not force it through. Once successfully inserted, it will click in.
  • Page 13  Charging the Battery D Connect the included USB cable’s small end into the camcorder’s USB input, and the larger end into the AC adaptor. The LED will IODVK in red and will VWD\ VROLGO\ OLW LQ UHG once the battery is fully charged.
  • Page 15  LED Light Color Statuses Blue LED: The camcorder is busy processing an image or video. Yellow LED: WiFi is enabled. When flashing yellow, the WiFi is waiting to connect; when solidly lit, WiFi is connected. Red LED: The battery is charging.  Recording Video Once powered on, the camcorder automatically enters VIDEO mode.
  • Page 16 The status LED will blink YELLOW while searching for a WiFi connection. Go in to your smartphone’s WiFi network settings menu, turn all wireless settings ON and connect to the network named “COLEMAN” to join your camera to the network. The WiFi password is 12345678.
  • Page 17 As part of the iOS operating system, your smartphone's Location Settings must be enabled in order to allow proper communication between your smartphone and your Coleman camera. Selecting will prevent your camera from connecting to the XDV app. If you selected “Don’t Allow”, then you can change this setting by going into your iOS Settings, selecting the XDV app, selecting the Location settings and select “While...
  • Page 18: Video Mode

    STEP 4: Operating the XDV App Your camera can now integrate with your smartphone. Upon launching the app, it will initially default to the video recording function. Follow the steps below to select modes. To change recording modes, tap the each mode icon on the at the center of the smartphone app.
  • Page 19 Recording Videos Remotely 1. To start recording a video, tap the Video icon on your smartphone screen. While a video is recording remotely, the status indicator LED will flash 2. The Video Recording mode can be changed by selecting one of the options shown below. You can select Normal video recording, Loop Recording or Time-Lapse.
  • Page 20 Shooting Photos Remotely 1. Switch to Photo mode by tapping the Camera icon on your smartphone screen. To capture a photo, tap the Camera icon again. 2. The Photo mode can be changed by selecting one of the options shown below. You can select Normal, Self-timer, Photo Burst or Time-Lapse.
  • Page 21 Viewing Media on the App To view your photos and videos on the app, tap the Media icon in the bottom middle of your smartphone screen. Then select Device at the top of your screen to show the media on the camcorder. Tap the photo or video file you wish to view.
  • Page 22 and tap the confirm button on the bottom right corner of your smartphone screen. If a photo or video is deleted on the app, it will also be removed from the memory card in your camera. Note: Any media deleted is permanent and cannot be undone.
  • Page 23 Changing Camera Settings on the App Settings can also be accessed through the app. Tap the Settings icon in the bottom right-hand corner of the screen to launch the Settings menu. From here, all of the camcorder settings can be adjusted.
  • Page 24 14. MENU & SETTINGS INTERFACE Overview Your camcorder comes preset with some user-adjustable settings to fine tune and customize how you would like your camcorder to function. The settings are already optimized and preset for the easiest experience. Before you begin, ensure you are in SETTINGS mode. From the main screen, press the MODE button until a gear is shown on the screen.
  • Page 25 2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You can select from 4K 30FPS, 2.7K 30FPS, 1080P 60FPS, 1080P 30FPS, 720P 120FPS, 720P 60FPS, 720P 30FPS. 3. Press the OK button to confirm your selected setting. 4.
  • Page 26 14.1.4 Loop Recording This setting allows you to set a maximum duration for each video clip recorded. Once you select an option, your camcorder will record video clips in this time interval only. Once your selected duration recording time is reached, the camcorder will end the recording and begin recording a new video file seamlessly.
  • Page 27 14.2 Photo Mode Settings Overview Your camcorder comes preset with some user-adjustable settings to fine tune and customize how you would like your photos to be captured. The settings are already optimized and preset for the easiest experience. Before you begin, ensure you are in SETTINGS mode. From the main screen, press the MODE button until a gear is shown on the screen.
  • Page 28 3. Press the OK button to confirm your selected setting. 4. Press the MODE button to exit the settings menu without making a selection. 14.2.3 Auto (Auto Capture) This feature allows you to capture a single photo at a set interval. It will continue to capture a single photo after each time interval until stopped.
  • Page 29 14.3 General Settings Overview Your camcorder comes preset with some user-adjustable settings to fine tune and customize your camcorder. The settings are already optimized and preset for the easiest experience. Before you begin, ensure you are in SETTINGS mode. From the main screen, press the MODE button until a gear is shown on the screen.
  • Page 30 14.3.3 WiFi This option activates the WiFi connection, this allows you to control the camcorder from the app on your smartphone. 1. In SETTINGS mode, select ‘Audio Recording’ by using the UP or DOWN buttons. 2. Press the ENTER button to turn WiFi On. 3.
  • Page 31 buttons. Press the ENTER button to enter the ‘Light Source Frequency’ submenu. 2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You can select from Auto, 50Hz, 60Hz. The default frequency for the United States is 60Hz.
  • Page 32 1. In SETTINGS mode, select ‘Auto Shutdown’ by using the UP or DOWN buttons. Press the ENTER button to enter the ‘Auto Shutdown’ submenu. 2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You can select from 1 minute, 2 minutes, 5 minutes, Close.
  • Page 33 14.4 Setup Settings Menu Overview Your camcorder comes preset with some user-adjustable settings to fine tune and customize your camcorder. The settings are already optimized and preset for the easiest experience. Before you begin, ensure you are in SETTINGS mode. From the main screen, press the MODE button until a gear is shown on the screen.
  • Page 34 14.4.3 Format Memory Card This setting allows you to erase all video and photo files stored on your memory card. 1. In SETTINGS mode, select ‘Format’ by using the UP or DOWN buttons. Press the ENTER button to enter the ‘Format’ submenu. 2.
  • Page 35 CX14WP Underwater Hand Bar / Remote Velcro 3/8-16 Socket User Manual Camera Case (100 ft.) Pole Mount Control Straps Tip Adaptor Clip Mount w/Extra Additional Lithium-Ion AC Adaptor USB Cable PC Software Mount Adhesive Strips Mounting Options Battery...
  • Page 36 Mount 2 Mount 1 Waterproof Housing Camera Camera Waterproof Housing Handle Bar/Pole Mount Waterproof Housing Mount 3...
  • Page 38 Coleman, , are registered trademarks of The Coleman Company, Inc. used under license ©2022 The Coleman Company, Inc. If you’re having difficulties with your camera, or would like further assistance, please call our toll-free technical support hotline at 800-441-1100. Please be...