Coleman Bravo CXS2WP Instructional Manual page 24

b. Remote control range: Remote control within 15 meters in any angle horizontally without barriers;
c. To press "Record", "Shutter" or "Stop" key on the remote control in standby mode can wake up the
system;
8. Standby mode:
A. Non-voice control standby:
Push the VOX switch to "OFF" and turn the power switch to "ON", the system will start working and
it will enter preview state after nishing initialization. In case of no any mission and operation, the
system will auto enter standby power-saving mode at the end of the auto standby time set. Press
"Record" or "Shutter" key at this time, or remote control any key on the remote control, the system
will be waked up.
Note:
a: To press keys on TFT screen in standby mode cannot wake up the system;
b: The LCD segment screen does not display anything in standby mode.
B. Voice control standby:
Push the VOX switch to "ON" and turn the power switch to "ON", the system will start working and
it will enter preview state after nishing initialization. In case of no any mission and operation, and
the environmental voice is lower than 65dB continuously, the system will auto enter standby power-
saving mode at the end of the auto standby time set. Press "Record" or "Shutter" key at this time, or
remote control any key on the remote control, the system will be waked up. When the environmental
voice is higher than 65dB, the system will wake up and enter video recording state.
Note:
a: To press keys on TFT screen in standby mode cannot wake up the system;
b: The LCD segment screen does not display anything in standby mode.
-21-