Parameter Settings - Coleman Bravo CXS2WP Instructional Manual

Parameter Settings:

In preview mode, press "M" key to enter the menu interface, press "<" or ">" key to move the cursor left
and right, and press "+" or "-" key to move the cursor up and down. After selecting the menu, press "OK"
key to set the selected menu and to press "M" key again can exit.
(1) Setting of camera parameter:
a. Video image resolution: Select 1080P,960P,720P, WVGA or QVGA;
(720P/960P mode do not contain the setup options of 1080P mode and 1080P modle have no the
QVGA mode)
b. Bit Rate: the sampling rate in transforming image into digital signals at the time of video recording.
Options in recording modes :1080P (12M/6M) 960P (8M/4M) 720P (8M/4M) WVGA (8M/4M).
QVGA(8M/4M)
Clear image requires high bit rate and large le size at the same time.
c. Laser synchronous shooting: Turn on or turn o the laser transmitter;
d. Shooting mode: Select video recording "
Notes:
a. Under the voice recording mode, Press "Record" key once, the system starts recording, voice
recording duration is displayed on the bottom of TFT display screen and the green indicator twinkles
slowly; if press"Record" key again, the system will stop and save the current audio le recorded, the
green indicator is o and the red indicator remains bright (the corresponding operating prompt is on
LCD segment screen), and it returns to the preview mode.
b. The voice recording process only responds to operations of "Record", "Shutdown" and "VOX Switch"
key; if turn on "VOX Switch" in voice recording, the voice recording will be stopped and the le will \
be auto saved.
c. The laser icon will be displayed on the top left corner of the preview interface when turning on the
function of laser synchronous shooting, which indicates the system is in this shooting mode. At this time, \
the laser will be turned on when starting recording and it will be turned o when stopping recording.
" or voice recording "
-11-
" ;