Advertisement
While our work could not have been possible without the gracious information shared over the last decade in the public domain,
we hope you appreciate our modifications, component selection, and construction techniques. Most of all, we hope the OTS
becomes an integral part of your tone equation to exhilarate your playing and music.
Rock on!
- Nik Azam
2) QUICK SETUP (for instant gratification)
1) Plug your guitar using a 1/4" instrument cable into the NOR input on the lower left of the front panel
2) Plug a suitable power cable from the OTS's rear panel MAINS cable inlet to your wall power receptacle
3) Plug the OTS into your speaker cabinet using 1/4" speaker cable
4) Set the IMPEDENCE selector to the match the impedance of your speaker cabinet
5) Plug the footswitch cable into the FOOT PEDAL jack on the rear panel of the amplifier
6) Set the OD and PAB switches on the rear panel in the PEDAL position
7) Set all rotary controls on the front panel to 12:00 (clock face)
8) Turn POWER AMP MASTER control to about 9:00 (clock face)
3
Hide quick links:
Advertisement
