Advertisement
2) QUICK SETUP (for instant gratification)
1) Plug your guitar using a 1/4" instrument cable into the INPUT on the far left of the front panel
2) Plug a suitable power cable from the SOY's rear panel MAINS cable inlet to your wall power receptacle
3) Plug the SOY into your speaker cabinet using 1/4" speaker cable
4) Set the IMPEDENCE selector to the match the impedance of your speaker cabinet
5) Set the PUSSY TRIMMER control on the rear panel to 2:00 (clock face)
6) Set all rotary controls on the front panel to 12:00 (clock face)
7) Turn MASTER control to about 9:00 (clock face)
8) Set front panel ERA switch in the right position (OFF)
9) Set front panel BRITE switches in the LEFT position
10) Set front panel POWER switch in the upward ON position (with adjacent switch to STANDBY) for 30 seconds to allow
tube filaments to warm up
11) Set front panel STANDBY switch upward to the ON position
12) ROCK!!!!!!
3
Advertisement
