Advertisement
In order to produce the most sonically faithful recreation possible, we continued to pour additional time, manpower, and money
into many custom parts specifically for this amplifier. In our humble opinion, the result of our labors is truly sublime and an
entirely unique circuit compared to our OTS series. Most of all, we hope the JM fills the gap you have been searching for and
becomes an integral part of your tone equation to exhilarate your playing and music.
Rock on!
- Nik Azam
2) QUICK SETUP (for instant gratification)
1) Plug your guitar using a 1/4" instrument cable into the INPUT on the left of the front panel
2) Plug a suitable power cable from the JM's rear panel A.C. MAINS cable inlet to your wall power receptacle
3) Plug the JM into your speaker cabinet using 1/4" speaker cable
4) Set the IMPEDENCE selector to the match the impedance of your speaker cabinet
5) Set all rotary controls on the front panel to 12:00 (clock face)
6) Turn MASTER control to about 9:00 (clock face)
7) Set front panel BRIGHT and MID BOOST switches in the middle position
8) Set front panel DEEP switch in the down position
9) Set front panel POWER switch in the ON position (with adjacent switch to STANDBY) for 30 seconds to allow tube
filaments to warm up
10) Set front panel OPERATE / STANDBY switch to OPERATE
11) ROCK!!!!!!
3
Advertisement
