Advertisement
2) QUICK SETUP (for instant gratification)
1) Plug your guitar using a 1/4" instrument cable into the upper I input on the right of the front panel
2) Plug a suitable power cable from the Plexi's rear panel MAINS cable inlet to your wall power receptacle
3) Plug the Plexi into your speaker cabinet using 1/4" speaker cable
4) Set the IMPEDANCE SELECTOR to the match the impedance of your speaker cabinet
5) Set all rotary tone and gain controls on the front panel to 12:00 (clock face)
6) Set VOLUME controls at just above minimum
7) Set front panel POWER switch in the ON position (down position, with adjacent STANDBY switch in the "STANDBY"
mode) for 30 seconds to allow tube filaments to warm up
8) Set front panel STANDBY switch to "ON" mode (down position)
9) ROCK!!!!!!
3
Advertisement
