9) Set front panel BRIGHT and MID BOOST switches in the down position
10) Set front panel ROCK / JAZZ switch in the up position (ROCK)
11) Set rear panel MAINS switch in the ON position (with adjacent switch to STANDBY) for 30 seconds to allow tube
filaments to warm up
12) Set rear panel OPERATE / STANDBY switch to OPERATE
13) ROCK!!!!!!
3) FRONT PANEL CONTROLS
On the front panel of the S&M Overtone Special, you can see thirteen items of interest.
From left to right:
1) INPUT ¼" instrument jacks (FET and NOR)
2) VOLUME control
3) BRIGHT two-way toggle switch
4) MID BOOST two-way toggle switch
5) ROCK / JAZZ two-way toggle switch
6) TREBLE control
4