Advertisement
2) QUICK SETUP (for instant gratification)
1) Plug your guitar using a 1/4" instrument cable into the INPUT on the right of the front panel
2) Plug a suitable power cable from the KING's rear panel MAINS cable inlet to your wall power receptacle
3) Plug the KING into your speaker cabinet using 1/4" speaker cable
4) Set the IMPEDANCE SELECTOR to the match the impedance of your speaker cabinet
5) Set all rotary controls on the front panel to 12:00 (clock face)
6) Set ERA switches to the far right position
7) Set all three BRIGHT switches to the far left positions
8) Set CHARACTER and BITE switches to the far left positions
9) Set FEEL switch down
10) Set front panel POWER switch in the ON position (up position, with adjacent STANDBY switch in the "STANDBY" mode)
for 30 seconds to allow tube filaments to warm up
11) Set front panel STANDBY switch to "ON" mode (up position)
12) ROCK!!!!!!
3
Advertisement
