Table of Contents
Advertisement
ARIES User Manual_
Starting the machine
11. To start the machine:
1-
Stand behind the handle.
2-
Turn the knob on the switch
3-
Keep it in this position until the motor has reached a sufficient rotation speed.
4-
Release the knob on the switch which will automatically return to work position 1.
12. Observe the operation of the abrasive belt.
To adjust belt position follow the PROCEDURES FOR CENTRING THE ABRASIVE BELT (pg. 19).
13. Close the abrasive cover (pos. 11 fig. B.)
15. To stop the machine turn the knob of the switch from position 1 to position 0.
March 2013 Edition
(
pos. 10 fig. B from the 0 position to the START position).
14. After lowering the lever
commence sanding.
18
(
pos. 4 fig. A)
Advertisement
Table of Contents
